dependant upon your mounting ecosystem, you may want to protected the MR55 to its mount place. Your MR55 could be secured in several means. If the MR55 continues to be mounted utilizing the mount cradle, it should be secured by using safety screw (Torx stability screws are integrated) and/or Kensington lock. If the mount cradle wasn't utilized, the MR55 can continue to be secured utilizing a Kensington lock
The MR55 attaches to the mount cradle with two tabs around the cradle that insert into your MR55, and it is secured on the cradle applying one screw.
Your MR55 is supplied that has a multi-colour LED mild about the front of the unit to Express information regarding system operation and functionality:
From hybrid workforces to smarter workspaces, carry together technology and touchpoints to deliver Fantastic encounters.
To attach the MR55 into the mount cradle correctly, line up the highest edge of the AP With all the prime tab on the mount cradle. For the reason that cradle is now mounted to the wall, guidebook the MR55 in the direction of the best tab and insert the best tab in the MR55s slot.
The included mount cradle template shows the hole patterns that ought to be employed for Just about every form of mount.
If a firewall is in position, it ought to make it possible for outgoing connections on distinct ports to certain IP addresses. The most existing listing of outbound ports and IP addresses for your personal particular Corporation can be found right here.
employing incorporated wall anchors and screws, connect the mount cradle towards your mounting wall or ceiling. It is usually recommended the MR55 be mounted to some wall or strong ceiling using the mount cradle for physical protection explanations.
The MR55 will turn on and the LED will glow solid orange. Should the unit will not need a firmware up grade, the LED will turn possibly inexperienced (no purchasers connected) or blue (consumers affiliated) in just thirty seconds.
Configure the static IP handle, Web mask, gateway IP deal with and DNS servers this AP will use on its wired link.
To release the MR55 with the mount cradle, first take out the safety screw that secures the MR55 towards the cradle’s bottom tab.
suggestion: Pre-assemble rubber check here spacers and screws to the mount cradle. The mount cradle can then be held with just one hand though the other hand retains a screwdriver. If mounting your MR55 to a dropped ceiling, skip to the "energy the MR55" area.
declare the unit to a corporation around the Meraki dashboard If a dashboard Firm won't however exist, produce a single
A good mounting area is important to obtaining the most effective efficiency out of one's MR55 access issue. retain the following in your mind:
If being used inside a mesh deployment, the MR55 must have line of sight to not less than two other Meraki gadgets. A Cisco husband or wife can assist make sure that your AP placement is ideal.